Microcontrollers

8-bit Microcontroller

8-bit Microcontroller

 

FT51A – 8 Bit 8051 Compatible Core

 

The FT51A series provides an 8051 compatible-core  with best in class performance and unique features including multiple ADCs, USB2.0 Full  Speed Device, and USB hub function targeted at cascading multiple FT51A systems, or to connect an additional USB peripheral like a mouse or keyboard.

 

Enhanced Digital features:

  • 8051-compatible core running at a maximum frequency of 48MHz
  • High speed operation 48MIPS@48MHz
  • 16kB program/shadow memory
  • 8kB data memory
  • True 0WS operation to 48MHz
  • FT12 series compatible USB2.0 Full-Speed/Low-Speed peripheral controller with Battery Charger Detection (BCD)
  • USB downstream port
  • Enhanced UART with transfer rates from 300 to 3M baud
  • Integrated hardware debugger
  • PWM controller
  • I2C master/slave controller
  • SPI master/slave controller
  • 4 extra timers plus watchdog function
  • 8-bit parallel FIFO
  • UART/SPI/FIFO, all with DMA functions
  • Integrated clock generation, no external crystals required

 

Enhanced Analog features:

 

  • 16 analog IO cells for ADC functions

 

Standard features:

 

  • 8051 peripheral set
  • Up to 16 Digital IO
  • USB DFU Bootloader
  • Integrated power-on-reset circuit
  • +5V single supply operation
  • Internal 3.3V/1.8V LDO regulators
  • Low operating and suspend current 20 mA (active) and 150 uA (suspend)
  • Range of compact packaging options available: 48-pin WQFN, 44-pin LQFP, 32-pin WQFN and 28-pin SSOP
32-bit Microcontroller

32-bit Microcontroller

 

The FT90x series has been developed for high speed, interface bridging tasks. With a parallel camera input, 10/100 Base-TX Ethernet Interface, CAN bus and USB2.0 Hi-Speed peripheral and host ports, this device offers excellent interconnect capabilities and fast data rates.

 

Enhanced Features:

 

  • 32-bit RISC architecture
  • 256kB program/shadow memory
  • High speed operation – 3.1DMIPS/MHz
  • 64kB data memory
  • True Zero Wait state operation up to 100MHz
  • USB DFU Bootloader

 

Standard Features:

 

  • Locked Loop (PLL) supports external crystal and clock source output
  • 32.768kHz RTC clock support
  • Four user timers with prescale and watchdog function
  • 3.3V single supply operation
  • Internal voltage regulator +1.2V to the digital core for lower power consumption
  • Supports Battery Charging Specification, for USB2.0 Hi-Speed peripheral port
  • Integrated power-on-reset circuit
  • Pb-free, RoHS packaging, 100QFN, 100LQFP, 76QFN and 80LQFP options.

 

Digital Connectivity:

 

  • Parallel camera interface
  • USB2.0 Hi-Speed (480Mbps) device controller with Batttery Charge Detection (BCD
  • USB2.0 Hi-Speed (480Mbps) host controller with BCD emulation
  • 10/100 BASE-TX Ethernet MAC with MII interface; compliant with the IEEE 802.3/802.3u standards
  • Two CAN 2.0 controllers for data transfer up to 1M bit/s
  • I2S master/slave interface (24.57/22.57MHz)
  • Two SPI slaves support single data transfer with 25MHz clock>
  • UART interface configured as 1 Full UART or 2 basic UARTs (TX/RX/CTS/RTS)
  • Two I2C bus interfaces can be configured as master or slave, with data transfers up to 3.4Mbps
  • Eight separate PWM channel outputs with support for PCM 8-bit/16-bit stereo audio output.

 

Analog Connectivity:

 

  • 7 input channels muxed to a single internal ADC
  • Two 10 bit DACs.