Industrial

InQor DC-DC Converters

The InQor® Series is composed of next-generation, board-mountable, isolated, fixed switching frequency DC‑DC converters that use synchronous rectification to achieve extremely high power conversion efficiency. Each module is supplied completely encased to provide protection from harsh environments.

 

Product Highlights

Operational

  • High Efficiency at Full Rated Current
  • Delivers Maximum Output Current with Minimal Derating
  • Wide Operating Input Voltage Range
  • Fixed Frequency Switching Provides Predictable EMI Performance
  • No Minimum Load Requirements
  • Conduction Cooled, Ruggedized Package
Benefits

  • High Power Density Means Smaller Size, More Board Area for Other Functions
  • Low Weight Reduces Strain During Vibration
  • Wide Range of Output Voltages from 1.2-50Vout
  • SynQor’s Proven Designs Lead to High Reliability and Quality
  • Single Board Production – Short Lead Times & Flexibility
  • Manufacturing Excellence – High Level of Automation Improves Lead Times, Flexibility and Reliability
Industrial Catalogue
NiQor High Voltage DC-DC Converters

The high input voltage NiQor® family of DC-DC converters offer a unique solution for converting high-powered, variable voltages to a wide range of output voltages. The converter is a non-isolated buck-boost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. Suitable for use in IBA or to provide a regulated output voltage from a battery source or other variable voltage source. Can be configured to Buck the input voltage down or Boost the input voltage up using a single external resistor.

 

 

Product Highlights

Operational

  • Wide input voltage ranges: 9-20V, 9-40V, 9-60V and 9-90V
  • Very high efficiency achieved by non-isolated design, up to 96%
  • Smooth transition from buck to boost as input or output voltage varies
  • Current-controlled “C” version for charging batteries
  • Configuration for negative outputs or inputs
  • Input and output current limit for buck-boost version
  • Full microprocessor control of all operating parameters
  • On-board input and output noise filters for quiet operation
  • Buck-only version available for higher efficiency
  • Encased/baseplated package for protection and conductive cooling
Buck Version

     (“T” as 5th character of part number):

  • Even higher efficiency achieved from optimization for voltage reduction
  • Output voltage is always less than input voltage
  • Ideal for applications where a voltage boost isn’t needed

Safety:

    • CAN/CSA C22.2 No. 60950-1:2007
    • UL 60950-1:2007
    • EN 60950-1/A12:2011

Medical Application
For medical power applications, the NQ20/40/60/90 converters are ideal for creating unique output voltages at moderate to high power levels when working with fixed-output power supplies like the SynQor ACuQor series.

As an example, the entire output power from an AQ0400MU48 power supply could be converted from 48V to 54V with a single NQ60W60QGC20 quarter-brick non-isolated convererter.

 

NiQor Catalogue Industrial Catalogue
EMI Filter Modules

SynQor provides EMI filters for the InQor series DC-DC converters. All EMI filters provide >80dB differential mode attenuation and >36dB or >60dB common mode attenuation (model dependent) and include stabilizing bulk capacitors and damping resistors

 

InQor DC Filters

  Model Number Input Voltage Output
Current
Isolation Voltage
(to case)
Maximum
DC Resistance
@ 100°C
Differential Mode Attenuation Common Mode Attenuation Pkg
Size 2
Continuous     Surge   1 (<100ms)
IQ040PFQTx30 ±40V ±50V 30A 2250V 20mΩ >80dB @ 250kHz >36dB @ 250kHz QB
IQ080PFQTx20 ±80V ±100V 20A 2250V 32mΩ >80dB @ 250kHz >36dB @ 250kHz QB
IQ200PFQTx10 ±200V ±250V 10A 2250V 70mΩ >80dB @ 500kHz >50dB @ 500kHz QB
IQ500PFQTx04 ±500V ±630V 4.0A 2500V 180mΩ >80dB @ 500kHz >50dB @ 500kHz QB

Note 1 While the passive filters can withstand these long-duration surge voltages, the surge voltage will be passed to the filter’s load. Care should therefore be taken to make sure that the load will also be able to withstand any applied surges.
Note 2
  • QB -> Quarter Brick
  • HB -> Half Brick

InQor AC Filters

  Model Number Input Voltage Current Output
Power
Isolation Voltage
(to case)
Maximum Series
Resistance
Differential Mode
Attenuation
Common Mode
Attenuation
Package
Size
ACLF060HTx230 85 to 264 Vrms 9.0 Arms 1 kW @ 115 Vrms
2 kW @ 230 Vrms
1500Vac 180mΩ @ 100°C >55dB @ 250kHz >55dB @ 250kHz HB
ACLFUNVETx230 85 to 264 Vrms 5.0 Arms 500 W @ 115 Vrms
1 kW @ 230 Vrms
1500Vac 180mΩ @ 100°C >55dB @ 250kHz >40dB @ 250kHz EB

 

Industrial Catalogue
PFCQor Modules

The PFCQor Power Factor Correction module is an essential building block of an AC-DC power supply.  Used in conjunction with a hold-up capacitor, SynQor’s high efficiency DC-DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF > 0.99) from a single phase AC input.

 

Industrial PFC Modules

  Model Number Input Voltage Output Voltage Output Power
 PFCU390HPx07 85-264 Vrms 390 Vdc 700 W
 PFCU390QPx04 85-264 Vrms 390 Vdc 350 W


Industrial Isolated PFC Modules

  Model Number Input Voltage Output Voltage Output Power
 PFICU12HTx27 85-264 Vrms 12 Vdc 325 W
 PFICU24HTx14 85-264 Vrms 24 Vdc 325 W
 PFICU28HTx12 85-264 Vrms 28 Vdc 325 W
 PFICU48HTx07 85-264 Vrms 48 Vdc 325 W

Mil-COTS PFC Modules

  Model Number Input Voltage Output Voltage Output Power
MPFC-115-3PH-270-FP 3-Phase 85-140 Vrms L-N 270 Vdc 1500 W
MPFC-115-3PH-270P-FP 3-Phase 85-140 Vrms L-N 270 Vdc N * 1500 W
MPFC‑U‑390‑HP 85-264 Vrms 390 Vdc 700 W
MPFC‑115‑270‑HP 85-180 Vrms 270 Vdc 700 W
MPFC-U-390-QP 85-264 Vrms 390 Vdc 350 W
MPFC-115-270-QP 85-180 Vrms 270 Vdc 350 W


Mil-COTS Isolated PFC Modules

  Model Number Input Voltage Output Voltage Output Power
 MPFIC-U-12-HT 85-264 Vrms 12 Vdc 325 W
 MPFIC-U-24-HT 85-264 Vrms 24 Vdc 325 W
 MPFIC-U-28-HT 85-264 Vrms 28 Vdc 325 W
 MPFIC-U-48-HT 85-264 Vrms 48 Vdc 325 W

 

Industrial Catalogue
ACuQor AC-DC Power Supplies

The AcuQor AC-DC power supply family operates over a universal input range of 85-264Vrms and 47-63Hz making it suitable for World-Wide deployment. Active Power Factor Correction is incorporated to a level >0.98 enabling compliance with IEC/EN61000-3-2. Single and Triple outputs of 48V, 36V, 28V, 24V, 15V or 12V are available to facilitate the use of Distributed Power Architectures and battery backup, and to directly drive components such as fans, motors, pumps, lamps and actuators.

 

PRODUCT MATRIX

ACuQor G-Series
Single Output
12V, 15V, 24V, 28V or 48V
(includes 5V@100mA standby)
800W (1000W Transient) 1100W (1300W Transient) 1400W (1800W Transient)

 

ACuQor E-Series
Single Output
12V, 24V, 36V or 48V
(includes 5V@50mA standby)
300W (400W Transient) 400W (500W Transient) 500W (700W Transient)
Triple Output
12V, 24V, 36V or 48V
(includes 5V@2A and 12V@4.2A standby)
300W (400W Transient) 400W (500W Transient) 500W (700W Transient)

 

Industrial Catalogue
NiQor Non-Isolated DC-DC Converters

The NiQor® DC-DC converter is a non-isolated buck regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The NiQor family of converters are used predominately in DPA systems using a front end DC-DC high power brick (48Vin to low voltage bus). The non-isolated NiQor converters are then used at the point of load to create the low voltage outputs required by the design. The wide trim module can be programmed to a variety of output voltages through the use of a single external resistor.

 

Industrial Catalogue