Power Systems

VPX DC-DC Power Supplies

SynQor’s VPX power supplies are compliant with VITA62, MIL-STD-704, MIL-STD-461 and MIL-STD-810G for 28Vin systems. The VPX delivers up to 1000W and up to 6 outputs with a typical efficiency of 91%. Offered in VITA approved ruggedized 3U and 6U size packages with internal conduction cooling and high speed backplane connectors.

 

Product Features

   Operational    Compliancy    Protection
  • Maximum Total Output Power: 1000W
  • Input EMI Filtering
  • -40°C to 85°C Operating Temperature (at wedge locks)
  • Current Sharing on +12V and +5.0V
  • Remote Sense
  • Standard VITA 62 Controls
    • VITA 62
    • MIL-STD-704
    • MIL-STD-461
    • MIL-STD-810

  • Over Temperature
  • Over/Under Input Voltage
  • Short Circuit
  • Input Transient Suppression*
  • Reverse Polarity Protection*
  • Inrush Current Limiter*
  • Surge Protection*

 

Military Power Systems Catalogue
Military-Grade Uninterruptible Power Supply (UPS)

Military-Grade Uninterruptible Power Supply (UPS) units are designed for the extreme environmental and demanding electrical conditions of Military applications.   SynQor’s UPS incorporates field proven high efficiency designs and rugged packaging technologies.  This UPS will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load.  Its use of lithium polymer batteries permits the lowest profile and lowest weight solution in its power class.  It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards.  Options include a DC output and the ability to also draw power from a military standard 28VDC input.

 

 Product Highlights

Features Options
  • Sealed, weather-proof, shock-proof construction
  • Hot swappable internal battery pack (lithium polymer)
  • >10 minute run-time at full power
  • Output Power: 1250W (1500VA); 2500W (3000VA)
  • Full power operation: -20°C to +55°C
  • Universal AC input: 80-265VAC; 47-65Hz
  • Power factor correction at AC input
  • Dual input (AC and optional DC)
  • True on-line double conversion
  • Cold start with no AC or DC input connections
  • Pure sinusoidal AC output voltage (115VAC, 60Hz)
  • Handles 0.0-1.0 power factor loads and non-linear loads
  • Communications and Signal I/O port
  • 1U rack mount unit (17″ x 21.5″); 2U rack mount unit (17″ x 22.2″)
  • Low weight (including battery pack): 32 lbs. (1500VA); 64 lbs. (3000VA)
  • DC input (28Vnom) for dual source
  • Extended battery pack (in 2U unit) gives >24 minutes of run-time
  • 360Hz – 800Hz AC input
  • 50Hz or 400Hz output
  • Shipboard version with floating neutral wire
  • 50Hz, 60Hz, or 400Hz output
  • DC1: Auxiliary DC output
    MPC-1500 – One output; up to 500W
    MPC-3000 – Two outputs; up to 500W each
  • DC2: Single Auxiliary DC output
    MPC-1500 – up to 1250W
    MPC-3000 – up to 2500W

 

Military Power Systems Catalogue
Military-Grade Power Conditioners

SynQor’s Military Power Conditioner units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MPC incorporates field proven high efficiency designs and rugged packaging technologies. This MPC will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include a DC output and the ability to also draw power from a military standard 28VDC input.

 

Product Highlights

Features Options
  • Sealed, weather-proof, shock-proof construction
  • Output power: 1250W (1500VA); 2500W (3000VA)
  • Power factor correction at AC input
  • True on-line double conversion
  • Full power operation: -40°C to +55°C
  • Universal AC input: 80-265VAC; 47-65Hz
  • Dual input (AC and optional DC)
  • DC input (28Vnom) for Dual Source
  • 360 — 800Hz AC input
  • Shipboard version with floating neutral wire
  • 115Vrms or 230Vrms AC output
  • 50Hz, 60Hz, or 400Hz output
  • DC1: Auxiliary DC output
    MPC-1500 – One output; up to 500W
    MPC-3000 – Two outputs; up to 500W each
  • DC2: Single Auxiliary DC output
    MPC-1500 – up to 1250W
    MPC-3000 – up to 2500W

 

Military Power Systems Catalogue
Military-Grade 3-Phase AC-DC Power Supply (MPS/MPPS)

SynQor’s Military AC-DC Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications.  SynQor’s MPS/MPPS incorporates field proven high efficiency designs and rugged packaging technologies.  This MPS/MPPS will accept a 3-Phase input with a wide range of input voltage and frequency values while delivering a well-conditioned continuous 4000W (5250W transient) DC semi-regulated output to the load.  It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards.

 

Product Highlights

Features
  • Sealed, weather-proof, shock-proof construction
  • 4000W Output Power
  • Full power operation: -40°C to +55°C
  • 3-Phase input: 80-265Vrms line-to-line; 47-800Hz
  • Power factor correction at AC input
  • Battle Mode for over-temperature events
  • Up to 8 units can be combined for higher power
  • User I/O and Configuration signal Port
  • SNMP Network Port
  • 1U rack mount unit (17.00″ x 20.42″)
  • Low weight: 28 lbs.

 

Military Power Systems Catalogue
Military-Grade Inverter (MINV)

SynQor’s Military Inverter units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MINV incorporates field proven high efficiency designs and rugged packaging technologies. This MINV will accept a DC input voltage while delivering a well-conditioned AC output to the load. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include a selection of output voltage amplitudes, frequencies, and configurations that provide a single output, two or three single-phase outputs, or a 3‑phase output.

 

 Product Highlights

Features Specification Compliance
  • Sealed, weather-proof, shock-proof construction
  • 4000W (5000VA) Output Power
  • Full power operation: -40°C to +55°C
  • DC Input:
    28: 22V – 33V Input Range
    180: 135V – 234V Input Range
  • Pure sinusoidal AC output voltage
  • Handles 0.0-1.0 power factor loads and non-linear loads
  • User I/O and Configuration signal ports
  • 1U high rack mount unit (17″ x 22.4″)
  • Low weight: 30 lbs

Options
  • 115Vrms, 230Vrms, or 240Vrms AC output
  • 50Hz, 60Hz, or 400Hz AC output
  • Multiple single-phase outputs and 3-Phase output units
  • Shipboard version with floating neutral wire
MINV-4000 units are designed to meet (pending):

  • MIL-STD-1399-300 – Interface Std for Shipboard Systems
  • MIL-STD-810 – Environmental Engineering Considerations
  • MIL-STD-461 – Electormagnetic Interference
  • MIL-STD-704 – Aircraft Electrical Power Characteristics
  • MIL-STD-1275 – Vehicle Electrical Power Characteristics

In-Line Manufacturing Process
  • AS9100 and ISO 9001 certified facility
  • Full component traceability

 

Military Power Systems Catalogue